Pickerington, OH 43147
aircompr
Air Compressor Pressure Switch.
These are very high quality switches!
This Setup will work on just about any Air Compressor. Campbell Hausfeld and Husky Both Use these on there air compressors.
Minimum pressure is 50psi, Max is 175. It is currently set @ 95 psi cut in and 125 psi cut off.
The Single Ports is 1/4" NPT
This will work for either a 120 Volt Compressors or a 240 Volt.
Shipping is $8 Priority Mail
Air Compressor Pressure Switch.
Great for 2 Stage Air Compressors!
These are very high quality switches!
This Setup will work on just about any Air Compressor. Campbell Hausfeld and Husky Both Use these on there air compressors.
Minimum pressure is 50psi, Max is 175. It is currently set @ 145 psi cut in and 175 psi cut off.
The Single Ports is 1/4" NPT
This will work for either a 120 Volt Compressors or a 240 Volt.
Shipping is $8 Priority Mail
85/105 Psi 12V Pressure switch
For use in air ride suspension applications, works with any tank and any compressor i.e. Campbell, Dewalt, Craftsman, viair, air-zenith, etc. Also works with train horn setups.
12 Volt or 110 Volt
switch can be mounted to tank (1/8 pipe thread) and tells the compressor(s) to kick on at 85 psi and to turn off at 105 psi.
Brand New and WORKS GREAT!!!
Shipping is Free in the United States!
For use in air ride suspension applications, works with any tank and any compressor i.e. Campbell, Dewalt, Craftsman, viair, air-zenith, etc. Also works with train horn setups.
12 Volt or 110 Volt
switch can be mounted to tank (1/8 pipe thread) and tells the compressor(s) to kick on at 90 psi and to turn off at 120 psi.
Shipping is Free in the United States!
110/145 Psi 12V Pressure switch
For use in air ride suspension applications, works with any tank and any compressor i.e. Campbell, Dewalt, Craftsman, viair, air-zenith, etc. Also works with train horn setups.
12 Volt or 110 Volt
switch can be mounted to tank (1/8 pipe thread) and tells the compressor(s) to kick on at 110 psi and to turn off at 145 psi.
Comes with Oring to prevent air from leaking
Shipping is Free in the United States!
120/150 Psi 12V Pressure switch
For use in air ride suspension applications, works with any tank and any compressor i.e. Campbell, Dewalt, Craftsman, viair, air-zenith, etc. Also works with train horn setups.
12 Volt or 110 Volt
switch can be mounted to tank (1/8 pipe thread) and tells the compressor(s) to kick on at 120 psi and to turn off at 150 psi.
Comes with Oring to prevent air from leaking
Shipping is Free in the United States!
170/200 Psi 12V Pressure switch
For use in air ride suspension applications, works with any tank and any compressor i.e. Campbell, Dewalt, Craftsman, viair, air-zenith, etc. Also works with train horn setups.
12 Volt or 110 Volt
switch can be mounted to tank (1/8 pipe thread) and tells the compressor(s) to kick on at 170 psi and to turn off at 200 psi.
Comes with Oring to prevent air from leaking
Shipping is Free in the United States!
Brand New Campbell Hauseld Air Compressor Switch
Part Number 20PS-B
Off : 100 PSI
On : 70 PSI
1/8" NPT MALE FITTING
Shipping is Free anywhere in the United States!
Shipping to Canada is $8
Copyright 2010 aircompressors4u. All rights reserved.
Pickerington, OH 43147
aircompr